View Our Website View All Jobs

Electrical Engineer

About DesignLinx:
DesignLinx Hardware Solutions is a VOSB (Veteran-Owned Small Business), specializing in FPGA Design and Support, and services clients from a wide range of industries.

We are well known and trusted experts in our field with extensive backgrounds in FPGA development. We offer expertise in Systems Design, Schematic Capture and Electronic Packaging / Mechanical Engineering Design, Signal Integrity and High Speed Serial IO (SERDES). We are also outstanding communicators and offer Project Management of design and support deliverables, ensuring our customers the highest quality of service.

Our Mission is to assist our customers to reach production faster, with less risk – all at the industry’s most competitive rates. We become a trusted extension of your engineering team and the result is increased designer productivity, faster time-to-market and a lower overall production cost.

Description:
Senior Designer or Electrical Engineer to contribute to the design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for Missile applications.

The Senior Electrical Engineer must be experienced in all aspects of circuit card design from concept through delivery to higher level assemblies as evidenced by multiple successful design completions (including hardware designs with processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, UART).

This position will function in multi-disciplined design teams across multiple projects. This person will be the Responsible Engineering Authority (REA) for development of one or more complex modules, CCAs or units and will be expected to apply rigorous and systematic design processes to ensure total design compliance. This position will interface with Integrated Product Team Leads (IPTL) and stake holders to ensure program objectives are achieved.

The position requires frequent use and application of technical standards, principles, concepts and techniques. Candidates will be expected to provide solutions to a variety of technical problems of moderate scope and complexity, working under general supervision. Successful candidate should expect to be immersed in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive.

Requirements:

  • U.S Citizenship required
  • Required Education (including Major): Bachelor’s Degree in Electrical Engineering (MS preferred) or similar degree and meets the experience
  • The ability to obtain and retain a Secret security Clearance
  • Minimum of 8 years Engineering design experience, with at least 2 years in a senior position
  • A self-motivated and effective communicator
  • Ability to prioritize work of others and handle multiple tasks at a time
  • Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, processor designs a plus
  • Proven ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration
  • Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution.
  • Experience with embedded test techniques, design for test, design margin analysis and design for production
  • A strong advocate for process improvement
  • Experience in managing schedule and resources to meet assigned milestones
  • Capable of functioning in multi-disciplined design teams across multiple projects

Desired Skills:

  • Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
  • Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
  • Experience with intellectual property generation (patents & publications)
  • Team and project leadership skills
  • Knowledge of software and/or FPGA code development
  • Experience leading a program transition from development to production
  • Demonstrated ability to manage technical and schedule risks and to identify cost reduction opportunities
  • Knowledgeable in cost/schedule development and management

NOTICE TO THIRD PARTY AGENCIES:
Please note that DesignLinx Hardware Solutions Inc., does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, DesignLinx Hardware Solutions, Inc. will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, DesignLinx explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of DesignLinx Hardware Solutions, Inc.


 

Read More

Apply for this position

Required*
Apply with Indeed
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

150
To comply with government Equal Employment Opportunity / Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Gender
Race/Ethnicity

Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status
I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER

Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 1/31/2020
Why are you being asked to complete this form?

Because we do business with the government, we must reach out to, hire, and provide equal opportunity to qualified people with disabilities.i To help us measure how well we are doing, we are asking you to tell us if you have a disability or if you ever had a disability. Completing this form is voluntary, but we hope that you will choose to fill it out. If you are applying for a job, any answer you give will be kept private and will not be used against you in any way.

If you already work for us, your answer will not be used against you in any way. Because a person may become disabled at any time, we are required to ask all of our employees to update their information every five years. You may voluntarily self-identify as having a disability on this form without fear of any punishment because you did not identify as having a disability earlier.

How do I know if I have a disability?

You are considered to have a disability if you have a physical or mental impairment or medical condition that substantially limits a major life activity, or if you have a history or record of such an impairment or medical condition.

Disabilities include, but are not limited to:

  • Blindness
  • Deafness
  • Cancer
  • Diabetes
  • Epilepsy
  • Autism
  • Cerebral palsy
  • HIV/AIDS
  • Schizophrenia
  • Muscular dystrophy
  • Bipolar disorder
  • Major depression
  • Multiple sclerosis (MS)
  • Missing limbs or partially missing limbs
  • Post-traumatic stress disorder (PTSD)
  • Obsessive compulsive disorder
  • Impairments requiring the use of a wheelchair
  • Intellectual disability (previously called mental retardation)
Please check one of the boxes below:

You must enter your name and date
Your Name Today's Date
Reasonable Accommodation Notice

Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please tell us if you require a reasonable accommodation to apply for a job or to perform your job. Examples of reasonable accommodation include making a change to the application process or work procedures, providing documents in an alternate format, using a sign language interpreter, or using specialized equipment.


iSection 503 of the Rehabilitation Act of 1973, as amended. For more information about this form or the equal employment obligations of Federal contractors, visit the U.S. Department of Labor's Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.


PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.